|
Понеделник, 07 Септември 2009 21:26 |
|
|
Модел 129 до 1994- CST, RST, RB, RH
|
|
Диагностика - купе и аксесоари -
Купе и аксесоари - част 3
|
Diagnostic Manual, Body and Accessories, Volume 3
|
|
|
| Diagnosis |
Page |
| Function Test |
11/1 |
| Diagnostic Trouble Code (DTC) Memory |
12/1 |
| Complaint Related Diagnostic Chart |
13/1 |
Electrical Test Program |
|
| Component Locations |
20/1 |
| Component Connections |
21/1 |
| Preparation for Test |
22/1 |
| Test |
23/1 |
| Survey of Electrical Limit Switch Signals |
24/1 |
| Survey of Electrical Valve Actuation |
25/1 |
| Soft Top Tester Nominal Values |
26/1 |
Hydraulic Test Program |
|
| Component Locations |
31/1 |
| Preparation for Test |
32/1 |
| Test (Soft top Closed) |
33/1 |
| Test (Soft top Up) |
34/1 |
The diagnosis of roll bar deployment in an accident is described in Diagnostic Manual, Body and Accessories, Volume 3, Chapter 19.2.
CAUTION !
Injury hazard from pinching and crushing, in extreme cases extremities can even be severed when caught in the mechanism.
When working on components activated via hand, electrically via motors, hydraulically, pneumatically via linkages, it is possible that severe injury can result in the severing, pinching, or crushing of body parts.
CAUTION !
Do not allow any body parts to be in the general area of the moving components.
Protective measures:
- Supervise work.
- Do not reach into the moving mechanism at any time during any tests.
- Keep away from the moving mechanism of components which are being activated via the HHT and or directly via circuit 30.
- Ensure that all test cables are of sufficient length.
|
|